The need for tumble drying is removed – this saves energy and protects more vulnerable, older garments from heat. Nikwax TX.Direct® Wash-In leaves a flexible water repellent treatment on individual fibres, allowing moisture vapour to pass through and maintaining breathability.

Uses per bottle:

• Approximately 100ml required per 2 items

For best results remove all non-washable parts and always clean item(s) first with Nikwax Tech Wash® in a separate wash cycle. No need to dry item(s) before waterproofing.  Shake well before use.

Machine Wash

1. Remove all detergent build-up from the detergent dispenser
2. Place maximum of 2 clean garments in washing machine
3. Use 100ml per garment (front loader) or 150ml per garment (top loader)
4. Run 30°C synthetic cycle and slow spin (front loader) or 40°C synthetic cycle (top loader)

Hand Wash (use gloves)

1. Immerse 1 clean item in 6 L of hand-hot water in a sink or bowl
2. Add 50ml of TX.Direct®
3. Agitate to mix, leave to soak for 5-10 minutes, then agitate thoroughly
4. Rinse in cold water until water runs clear

Do not machine-wash garments if taped seams have become dislodged.*
To maintain waterproofing always wash with Nikwax Tech Wash®. Do not use detergents.

*Faulty taped seams sometimes become detached on old or worn garments. They can be re-stuck using a proprietary clear glue after waterproofing and drying.